If you wanted to follow the format of the rest of the entries, I would suggest you use the long form first, with the Acronym in the brackets.  This would then look like the following:

Add        LAV III                                                   1              1              39           2              1              
Add        LAV III Infantry Section Carrier (ISC)        1              1              39           2              1              1
Add        LAV III TOW Under Armour (TUA)             1              1              39           2              1              2
Add        LAV III Observation Post Vehicle (OPV)      1              1              39           2              1              3
Add        LAV III Command Post Vehicle (CPV)         1              1              39           2              1              4
Add        LAV III Engineer LAV (ELAV)                     1              1              39           2              1              5


Also, if you wanted to follow the OPMAN - "7.3 General Guidelines and Rules" -  you should also submit a new CR to add the acronyms that are not currently listed in UID 2 (use the Blank-DictonaryEnum-CR form).  Currently the following acronyms are missing:
ICS
TUA
OPV
ELAV

The 2nd step is often overlooked when adding acronyms, but it does get mentioned during the working group meetings on occasion.



David Ronnfeldt

Simulation Standards Officer
Australian Defence Simulation and Training Centre
Joint Operations Command
Annex, 10 Whyalla Street (FYD-GF-21)
PO Box 7940
Canberra BC ACT 2610 
Ph:  +61 (0)2 6266 1669
Fax: +61 (0)2 6266 1780

########################################################################

To unsubscribe from the SAC-SWG-ENUM list, click the following link:
https://discussions.sisostds.org/index.htm?SUBED1=SAC-SWG-ENUM&A=1