SAC,

Please review the document and post any comments here. I would like to
have this sent out to the broader SISO community in the next two weeks.
There is no requirement for a Vote, but if you have looked at it and
have nothing to add/change please post so. Obviously also feel free to
post comments regarding any changes you would like to see.
Jim


SISO-SAC: James Kogler wrote:
> From: "James Kogler" ([log in to unmask] )
>
> *** This message was generated from SISO-SAC ***
>
> All,
>
> Sorry for the delay. This has been some time in coming, much like the
> RPR FOM itself. Please respond with any suggested changes. Once everyone
> is fine with the wording we can have VAN post it to the general list.
> The steps for dissolution are:
>
> * /The SAC will prepare a PDG Dissolution Recommendation outlining
> the reasons for dissolving the PDG and identifying the process the
> SAC has taken to identify remedies to these reasons./
> * /The SAC will post the PDG Dissolution Recommendation for a thirty
> (30) day review by the SISO community. The SISO community may
> comment on the PDG Dissolution Recommendation at this time. The
> SAC will develop a response for each comment, edit the PDG
> Dissolution Recommendation as appropriate, and forward the PDG
> Dissolution Recommendation, Comments, and Responses to the EXCOM./
> * /The EXCOM will approve or disapprove the PDG Dissolution
> Recommendation. In the case of approval of the PDG Dissolution
> Recommendation, the SAC will administratively dissolve the PDG. In
> the case of disapproval of the PDG Dissolution Recommendation, the
> EXCOM will direct remedies for each issue leading to the PDG
> Dissolution Recommendation and the SAC will work with the PDG to
> implement these remedies./////
>
> The production of this document meets the criteria for the first bullet.
>
> Jim
>
>
> -- Attachment: RPR-FOM-Final.doc
>
> To reply: [log in to unmask]
>
> To start a new topic: [log in to unmask]
>
> To view discussion:
> http://discussions.sisostds.org/default.asp?boardid=2&action=9&readE989&fid1
>
>
> To (un)subscribe: Send a message to
> [log in to unmask]
> with the word
> unsubscribe in the message body.
> Important: the unsubscribe email needs to be in plain text format, and
> needs to have no subject line.
>
> SISO: http://www.sisostds.org/
>
>

--
--
Jim Kogler
Product Manager, Link Products
VT MAK

68 Moulton St, Cambridge, MA 02138
Voice: 617.876.8085x104, fax: 617.876.0041


VR-Vantage, MAK's 3D Visual Solution, is here!
Find out how it can fit your simulation at VR-Vantage.com



To unsubscribe from the SISO-SAC list, click the following link:
https://discussions.sisostds.org/index.htm?SUBED1=SISO-SAC